MARS 7800/6350G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	4181
Shot weight	g	3805
Shot speed	mm/s	811
Screw diameter	mm	110
Injection pressure	MPa	152
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	7800
Opening Stroke	mm	980
Space between tie bars	mm x mm	980 x 980
Mold thickness(min)	mm	400
Mold thickness(max)	mm	980
Hydraulic ejection stroke	mm	260
Hydraulic ejection force	kN	186
POWER UNIT
Pump motor	kW	77
Heating capacity	kW	67.8
GENERAL
Oil tank capacity	L	1350

Platen Dimensions

Machine Dimmension

As the center of the IML system, to choose an injection molding machine of which is the most suitable to your IML containers and mould design would be the key points to start a success IML project. Before the decision making of an injection molding machine for your project, you should keep in mind:

The material of which the IML containers to be produced from
The opening stroke of the injection molding machine
The expected cycle time of the system

For different parts, you can choose different type of injection molding machine according to your budget and expected daily output of the IML containers.

High Speed Injection Molding Machine for Think-wall Containers

High Speed Hydraulic Injection Molding Machine:
For thin wall containers, a high speed hydraulic injection molding machine is no doublt a price smart choice for your IML project. There're many producers of high speed hydraulic injection molding machine manufacturers in China, among which the most popular would be:
- Haitian MARS F/H series high speed injection molding machine
- YIZUMI P/S3 series high speed injection molding machine
- HMD SP series high speed injection molding machine
- ChenHsong Speed-Pack series high speed injection molding machine
- Golden Eagle GEKW/GS series high speed injection molding machine
- Powerjet KF series of high speed injection molding machine
- DAKUMA DKM/HH series high speed injection molding machine
Hybrid Injection Molding Machine
A high speed hybrid injection molding machine will have more energy efficiency than a hydraulic injection molding machine, the popular hybrid injection molding machine made in China include:
- Yizumi D1-E series of hybrid injection molding machine
- Haida KDY series of high speed hybrid injection molding machine
- FCS AF series hybrid injection molding machine
- PowerJet JEV Series hybrid injection molding machine
All Electric Injection Molding Machine
As a solution of energy saving and clean production, an all electric injeciton molding machine would be the top choice for the IML production of thin-wall food package, the recommended brand would be:
- Zhafir ZE/VE series of all electric injection molding machine
- Yizumi E series of high speed all electric injection molding machine
- VALMO Real P series full electric injection molding machine
- HMD EM Series full electric injection molding machine
- LK ELETTRICA Series of full electric injection molding machine
- BOLE FE Series all electric injection molding machine
- WELLTEC D Series all electric injection molding machine

Injection Molding Machine for IML Paint Buckets

As a deep cavity products, the production of an IML paint buckets will request the injection molding machine to have a larger opening stroke. To reduce the cost of the injection molding machine, some of the injection molding machine manufacturers from China custom designed the machine specialized for the production of IML paint bucket, among which include:

HD B/U series of injection molding machine for IML paint bucket production
PowerJet PB series of injection molding machine for IML paint bucket production
LiSong GT/DT Series of injection molding machine for IML Paint bucket production

Best Buy Robotic Arm for Injection Molding Machine

SW6308-20

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
980	640	165	645	800	235	565	1280	2320	1500	1690	3kg

The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Product Descriptions

This EOAT is for 2 Cavities Parts Picking;
The Parts Would be Picked with Clamping;
The Sprue Gripper is Included for Sprue Gate Gripping;
The Sprue Gate Would be Cut by Air Nipper;
The Gross Weight of the EOAT Seet is about 1.5kg.

Bom List

Product Name	PN #	Model	Quantity
Sus Tube	4.Y00021	PST12-1500	2
Air Nipper	1.Y00004	GT-NY25	2
Straight Blades for Plastic	1.Y00037	NY25AJ	2
Fixing Block	7.Y00633	SCE2-25	2
Tube Plugs	1.Y03638	PST12-1500	11
Cross Connector	7.Y00027	SMBT-2012	2
Access Robot Bracket	7.Y00002	SMBH1-12M6	6
L-Type Thread Hose Fitting	1.Y02809	APL6-M5	3
Slide Bracket	7.Y00004	SCF4-1240W16	7
Slide Bracket	7.Y00001	SMBS-12T16	7
Sprue Gripper	8.Y00091	GR12-12-CN	1
Cross Connector	7.Y00020	SMBT-1212	1

Q & A About Robotic Arms and Injection Automation

Why is 8 Cavities Mold Design the Best Solution for Elbow with Nuts?

For PVC/PPR pipe fittings with nuts with a diameter of around φ25mm most of the producer will choose an injection molding machine of around 250T and a mold cavities of 8 Cavities, will a more cavities mold design with a larger injection molding machine a better choice for pipe fittings producers?

8 Cavities Pipe Fittings Nut Insertion Automation Solution

According to the experience of working with LESSO group in the automiztion of their PVC/PPR pipe fittings injection production system, we finally decide to have an 8 cavities mold deisgn with 250T injection molding machine because:

A 250T injection molding machine with 8 cavities mold design is an economic investment to start up a pipe fittings injection production system.
For a pipe fittings auto-injection production system with nut insertion, the weight of the EOAT would be very heavy. An eight cavities solution will perfectly balance the payload of the injection robot and weight of the EOAT.
An 8 cavities layout design of the pipe fittings will produce a better mold flow during the injection production of the pipe fittings.

Anyway, to upgrade your PVC/PPR pipe fittings injection molding system you must keep in mind that it's only valuable to have an automation system for bulk production products, which means that one injection molding machine with only one mold to be equipped with one automation system for the pipe fittings' Nut insertion, runner cutting and parts picking.

For any other question about a PVC/PPR pipe fittings auto-production system please contact Adams from SWITEK for a turn-key solutions of pipe fittings production.

MARS 7800/6350G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Machine Specification

Machine Dimension

IML Projects Injection Molding Machine Selection

Best Buy Robotic Arm for Injection Molding Machine

The Application of End of Robotic Arm Tooling

Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Q & A About Robotic Arms and Injection Automation

Contact SWITEK Robot On WhatsApp.