MARS 3000/1800G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	845
Shot weight	g	769
Shot speed	mm/s	238
Screw diameter	mm	60
Injection pressure	MPa	213
Screw L:D ratio	--	21.7
CLAMPING UNIT
Clamping force	kN	3000
Opening Stroke	mm	600
Space between tie bars	mm x mm	660 x 660
Mold thickness(min)	mm	250
Mold thickness(max)	mm	660
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	62
POWER UNIT
Pump motor	kW	30
Heating capacity	kW	24.05
GENERAL
Oil tank capacity	L	550

Platen Dimensions

Machine Dimmension

As the center of the IML system, to choose an injection molding machine of which is the most suitable to your IML containers and mould design would be the key points to start a success IML project. Before the decision making of an injection molding machine for your project, you should keep in mind:

The material of which the IML containers to be produced from
The opening stroke of the injection molding machine
The expected cycle time of the system

For different parts, you can choose different type of injection molding machine according to your budget and expected daily output of the IML containers.

High Speed Injection Molding Machine for Think-wall Containers

High Speed Hydraulic Injection Molding Machine:
For thin wall containers, a high speed hydraulic injection molding machine is no doublt a price smart choice for your IML project. There're many producers of high speed hydraulic injection molding machine manufacturers in China, among which the most popular would be:
- Haitian MARS F/H series high speed injection molding machine
- YIZUMI P/S3 series high speed injection molding machine
- HMD SP series high speed injection molding machine
- ChenHsong Speed-Pack series high speed injection molding machine
- Golden Eagle GEKW/GS series high speed injection molding machine
- Powerjet KF series of high speed injection molding machine
- DAKUMA DKM/HH series high speed injection molding machine
Hybrid Injection Molding Machine
A high speed hybrid injection molding machine will have more energy efficiency than a hydraulic injection molding machine, the popular hybrid injection molding machine made in China include:
- Yizumi D1-E series of hybrid injection molding machine
- Haida KDY series of high speed hybrid injection molding machine
- FCS AF series hybrid injection molding machine
- PowerJet JEV Series hybrid injection molding machine
All Electric Injection Molding Machine
As a solution of energy saving and clean production, an all electric injeciton molding machine would be the top choice for the IML production of thin-wall food package, the recommended brand would be:
- Zhafir ZE/VE series of all electric injection molding machine
- Yizumi E series of high speed all electric injection molding machine
- VALMO Real P series full electric injection molding machine
- HMD EM Series full electric injection molding machine
- LK ELETTRICA Series of full electric injection molding machine
- BOLE FE Series all electric injection molding machine
- WELLTEC D Series all electric injection molding machine

Injection Molding Machine for IML Paint Buckets

As a deep cavity products, the production of an IML paint buckets will request the injection molding machine to have a larger opening stroke. To reduce the cost of the injection molding machine, some of the injection molding machine manufacturers from China custom designed the machine specialized for the production of IML paint bucket, among which include:

HD B/U series of injection molding machine for IML paint bucket production
PowerJet PB series of injection molding machine for IML paint bucket production
LiSong GT/DT Series of injection molding machine for IML Paint bucket production

Best Buy Robotic Arm for Injection Molding Machine

SW7522DS

Unit: mm

X1	X2	X3	X4	Y	YM1	YM2	Z	L	W	H	Payload
1785	1680	0	0	2200	650	1550	3120	4160	2850	2830	15kg

The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Product Descriptions

This EOAT is for 2 Cavities Parts Picking;
The Parts Would be Picked with Clamping;
The Sprue Gripper is Included for Sprue Gate Gripping;
The Sprue Gate Would be Cut by Air Nipper;
The Gross Weight of the EOAT Seet is about 1.5kg.

Bom List

Product Name	PN #	Model	Quantity
Sus Tube	4.Y00021	PST12-1500	2
Air Nipper	1.Y00004	GT-NY25	2
Straight Blades for Plastic	1.Y00037	NY25AJ	2
Fixing Block	7.Y00633	SCE2-25	2
Tube Plugs	1.Y03638	PST12-1500	11
Cross Connector	7.Y00027	SMBT-2012	2
Access Robot Bracket	7.Y00002	SMBH1-12M6	6
L-Type Thread Hose Fitting	1.Y02809	APL6-M5	3
Slide Bracket	7.Y00004	SCF4-1240W16	7
Slide Bracket	7.Y00001	SMBS-12T16	7
Sprue Gripper	8.Y00091	GR12-12-CN	1
Cross Connector	7.Y00020	SMBT-1212	1

Q & A About Robotic Arms and Injection Automation

Which Robot is the Best one for HaiTian 5^th Generation of MA5300 Servo Injection Molding Machine?

MA Series of servo hydraulic energy-saving injection molding machine is the best selling products of Haitian group for the house hold production production. It now comes to the 5^th generation of the technology and will bring the house hold products producers more possibility in their production.

The promoting video uplaunched on Youtube by Haitian group of the 5^th generation MA Series injection molding machine is MA5300, which is a medium sized injection molding machine with a clamping force of 5300kN for the production of small and medium sized house hold products.

The robot for Haitian MA5300 will have two option. For the picking application of the parts SW6712DS-20 which as a payload up to 6kg would be an economic solution; while for projects of house hold products production with complex EOAT design say in mold insertion, SWITEK SW6715DS with a payload up to 15kg would be a better choice. And for projects of 3 plates mold or stack mold SWITEK will also provide double arms 5 axis servo injection robot.

For more information about SWITEK injection robot for HaiTian injection molding machine please contact Adams from SWITEK Automation, for a "Just in Need" proposal of injection robot selection.

MARS 3000/1800G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Machine Specification

Machine Dimension

IML Projects Injection Molding Machine Selection

Best Buy Robotic Arm for Injection Molding Machine

The Application of End of Robotic Arm Tooling

Two Cavities Parts Picking EOAT with Runner Cutting by Air Nipper

Q & A About Robotic Arms and Injection Automation

Contact SWITEK Robot On WhatsApp.