sales06@switek.biz
+86 186 5927 5869
Abonnieren Sie uns
sales06@switek.biz
+86 186 5927 5869
Abonnieren Sie uns
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 286 |
| Shot weight | g | 260 |
| Shot speed | mm/s | 160 |
| Screw diameter | mm | 45 |
| Injection pressure | MPa | 196 |
| Screw L:D ratio | -- | 22 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2300 |
| Opening Stroke | mm | 550 |
| Space between tie bars | mm x mm | 610 x 610 |
| Mold thickness(min) | mm | 250 |
| Mold thickness(max) | mm | 680 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 52 |
| POWER UNIT | ||
| Pump motor | kW | 24 |
| Heating capacity | kW | 17.35 |
| GENERAL | ||
| Oil tank capacity | L | 0 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 6396 mm |
| B | 1195 mm |
| C | 1667 mm |
| D | 430 mm |
| E | 1388 mm |
| F | 311 mm |
| G | 1801 mm |
| H | 21611 mm |
| I | φ100 mm |
| J | φ3 mm |
For different parts, you can choose different type of injection molding machine according to your budget and expected daily output of the IML containers.
High Speed Injection Molding Machine for Think-wall Containers
For thin wall containers, a high speed hydraulic injection molding machine is no doublt a price smart choice for your IML project. There're many producers of high speed hydraulic injection molding machine manufacturers in China, among which the most popular would be:
A high speed hybrid injection molding machine will have more energy efficiency than a hydraulic injection molding machine, the popular hybrid injection molding machine made in China include:
As a solution of energy saving and clean production, an all electric injeciton molding machine would be the top choice for the IML production of thin-wall food package, the recommended brand would be:
Injection Molding Machine for IML Paint Buckets
As a deep cavity products, the production of an IML paint buckets will request the injection molding machine to have a larger opening stroke. To reduce the cost of the injection molding machine, some of the injection molding machine manufacturers from China custom designed the machine specialized for the production of IML paint bucket, among which include:
SW6308D-20
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 740 | 640 | 140 | 415 | 800 | 235 | 565 | 1350 | 2320 | 1500 | 1460 | 3kg |
|---|
EOAT Assembly Demonstration -- One Cavity Car Threshold Strip Picking EOAT
Product Descriptions
Is there any Low Budget Solutions for PVC Pipe Fittings Runner Cutting?
PVC pipe fittings are one of the most commonly used connector in the drainage project and a cold runner designed mold is the most economic solutions for the production of the PVC pipe fittings, but the removal of the runner in result is a labour intensive work. Is there any economic way to remove the runners from the PVC pipe fittings automatically?
For the producer of PVC pipe fittings the most economic soluton to remove the runner is with an Air Nipper fixed to the picking robot immediately after the PVC pipe fittings picked out from the mould. The robot will drop the seperated pipe fittings and runner to different containers. Below configuration of SWITEK runner cutting solution for 16 cavities PVC pipe fittings for your reference:
The Air Nipper runner cutting system is an easy to start solution for the producers of PVC pipe fittings, which the Air Nipper would be controlled by the picking robot and is the best solution for the small size PVC pipe fittings (with a diameter around φ25mm). Anyway it also must be custom made according to the mold design.
For more solutions about the pipe fittings runner cuttings and other automation solutions please contact Adams from SWITEK, for a profound proposal of turn-key solutions of pipe fittings production.
