switek email

sales06@switek.biz

switek whatsapp

+86 186 5927 5869

Abonnieren Sie uns

.
660 SEIII C -- Welltec Machinery Ltd.

Description Unit Value
INJECTION UNIT
Shot volume cm3 3810
Shot weight g 3429
Shot speed mm/s 161
Screw diameter mm 105
Injection pressure MPa 125
Screw L:D ratio -- 18
CLAMPING UNIT
Clamping force kN 6600
Opening Stroke mm 910
Space between tie bars mm x mm 920 x 920
Mold thickness(min) mm 350
Mold thickness(max) mm 920
Hydraulic ejection stroke mm 290
Hydraulic ejection force kN 166
POWER UNIT
Pump motor kW 385
Heating capacity kW 35.73
GENERAL
Oil tank capacity L 1000

Platen Dimension

Machine Dimmension

# Value
A 2280 mm
B 2125 mm
C 2545 mm
D 7783 mm
E 9157 mm
F 2193 mm
G 1942 mm
H 1420 mm
I 850 mm
J 960 mm
K 971 mm

As the center of the IML system, to choose an injection molding machine of which is the most suitable to your IML containers and mould design would be the key points to start a success IML project. Before the decision making of an injection molding machine for your project, you should keep in mind:
  • The material of which the IML containers to be produced from
  • The opening stroke of the injection molding machine
  • The expected cycle time of the system

For different parts, you can choose different type of injection molding machine according to your budget and expected daily output of the IML containers.

High Speed Injection Molding Machine for Think-wall Containers

  • High Speed Hydraulic Injection Molding Machine:

    For thin wall containers, a high speed hydraulic injection molding machine is no doublt a price smart choice for your IML project. There're many producers of high speed hydraulic injection molding machine manufacturers in China, among which the most popular would be:

    • Haitian MARS F/H series high speed injection molding machine
    • YIZUMI P/S3 series high speed injection molding machine
    • HMD SP series high speed injection molding machine
    • ChenHsong Speed-Pack series high speed injection molding machine
    • Golden Eagle GEKW/GS series high speed injection molding machine
    • Powerjet KF series of high speed injection molding machine
    • DAKUMA DKM/HH series high speed injection molding machine

  • Hybrid Injection Molding Machine

    A high speed hybrid injection molding machine will have more energy efficiency than a hydraulic injection molding machine, the popular hybrid injection molding machine made in China include:

    • Yizumi D1-E series of hybrid injection molding machine
    • Haida KDY series of high speed hybrid injection molding machine
    • FCS AF series hybrid injection molding machine
    • PowerJet JEV Series hybrid injection molding machine

  • All Electric Injection Molding Machine

    As a solution of energy saving and clean production, an all electric injeciton molding machine would be the top choice for the IML production of thin-wall food package, the recommended brand would be:

    • Zhafir ZE/VE series of all electric injection molding machine
    • Yizumi E series of high speed all electric injection molding machine
    • VALMO Real P series full electric injection molding machine
    • HMD EM Series full electric injection molding machine
    • LK ELETTRICA Series of full electric injection molding machine
    • BOLE FE Series all electric injection molding machine
    • WELLTEC D Series all electric injection molding machine

Injection Molding Machine for IML Paint Buckets

As a deep cavity products, the production of an IML paint buckets will request the injection molding machine to have a larger opening stroke. To reduce the cost of the injection molding machine, some of the injection molding machine manufacturers from China custom designed the machine specialized for the production of IML paint bucket, among which include:
  • HD B/U series of injection molding machine for IML paint bucket production
  • PowerJet PB series of injection molding machine for IML paint bucket production
  • LiSong GT/DT Series of injection molding machine for IML Paint bucket production
Best Buy Robotic Arm for Injection Molding Machine
injection robot

SW7725DS

injection robot

Unit: mm

X1 X2 X3 X4 Y YM1 YM2 Z L W H Payload
2250 1720 0 0 2500 680 1520 4000 5050 3005 3200 50kg
The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- Two Cavities Parts Picking EOAT with Runner Gripping

Two Cavities Parts Picking EOAT with Runner Gripping

Product Descriptions

  • This EOAT is for 2 Cavities Parts Picking;
  • The Parts Would be Picked with Vacuum Cup;
  • The Sprue Gripper is Included for Sprue Gate Gripping;
  • The EOAT has the Air Circuit Divided into Two Suction Route and one Gripping Route;
  • The Gross Weight of the EOAT Seet is about 2kg.

Bom List

Product Name PN # Model Quantity
Quick Changer 7.Y00175 QCS-G100 1
Sprue Gripper 8.Y00050 GR12-12CP 1
Plugs for Profile 4.Y00069 PEP2518 10
Cross Mounting Bracket for Profiles 7.Y00194 SMBA-2525T 6
Extruded Profile 4.Y00455 PEP2518-1000 2
Vacuum Cups VS2 Series 1.Y03085 VS2-SA11 6
Vacuum Cup Fitting 7.Y00703 VM-02-G18 6
Rotative Suspensions 8.Y00061 VFR1421-G18 6
Mounting Bracket 7.Y00200 SMBE1-1440T 6
Connector 1.Y02510 APF-M5 2
Side Manifold Block 7.Y00157 SMB-06M5 2
L-Type Threaded HOse Fitting 1.Y02722 APL6-01 8
Straight Threaded Hose Fitting 1.Y02725 APC6-01 6

Q & A About Robotic Arms and Injection Automation

Is the Stack Mold an Economic Solution for the Cutlery Production?

Stack mold is a popular solution of house hold products because it can maximize the productivity of the injection molding machine. But among the producers of the cutlery the stack mold is not popular, why and what's the advantages and disadvantages of the stack molds solutions for cutlery production?

cutlery packing solutions

SWITEK 24+24 Stack Mold Cutlery Packing Solutions

The advantage of the stack mold solutions is the productivity of the system. As show on the stack mold solutions above that it's possible to produce 48 pcs of spoons or forks and have them well box packed in about 10s by a 280T injection molding machine (Which is a special injection molding machine designed by WEIDA machinery for the stack mold production, the nozzle of the injection molding machine is installed to the top of the injection molding machine) while would be possible to have a maximum of 32 cavities mold design by with a standard mold design.

Against the advantage of the stack mold solution, the disadvantages of the system is also obvious:

  • The Cost of the System: Not only the cost of the mold, a stack mold solution will also increase the cost of the automation system and a much larger floor space for the installation of the cutlery packing system.
  • The Difficulty of the Maintenance: The maintenance of the stack mold cutlery production system would be much more complex, the producer must have the capacity to do the maintenance of both the stack mold and the auto-packing system for the stack mold. It woudl be a big challenge to most of the small and medium sized producer of the cutlery producers.
  • New Mold Technology Provide More Economic Alternative Solutions: Instead of a stack mold solution, a vertical 24+24 cavities single mold solution will provide a counter productivity of the cutlery but much lower cost of investment in both the mold and automation system.

Anyway, cutlery packing system is systematic integration of the injection molding machine, the mold design and automation system design, the best way would be to contact Adams from SWITEK for a turn-key solution of the cutlery to get a ready to work cutlery packing system.

Email: sales06@switek.biz

WhatsApp

WeChat

Contact SWITEK Robot
Home
Plastic Machinery News

HuangYanZheng©Copy Right