sales06@switek.biz
+86 186 5927 5869
Shopping
sales06@switek.biz
+86 186 5927 5869
Shopping
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 2799 |
| Shot weight | g | 2519 |
| Shot speed | mm/s | 148 |
| Screw diameter | mm | 90 |
| Injection pressure | MPa | 170 |
| Screw L:D ratio | -- | 21 |
| CLAMPING UNIT | ||
| Clamping force | kN | 5300 |
| Opening Stroke | mm | 850 |
| Space between tie bars | mm x mm | 840 x 830 |
| Mold thickness(min) | mm | 300 |
| Mold thickness(max) | mm | 850 |
| Hydraulic ejection stroke | mm | 240 |
| Hydraulic ejection force | kN | 166 |
| POWER UNIT | ||
| Pump motor | kW | 352 |
| Heating capacity | kW | 35.73 |
| GENERAL | ||
| Oil tank capacity | L | 700 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 2244 mm |
| B | 2005 mm |
| C | 2495 mm |
| D | 7846 mm |
| E | 8995 mm |
| F | 1809 mm |
| G | 1900 mm |
| H | 865 mm |
| I | 800 mm |
| J | 945 mm |
| K | 950 mm |
For different parts, you can choose different type of injection molding machine according to your budget and expected daily output of the IML containers.
High Speed Injection Molding Machine for Think-wall Containers
For thin wall containers, a high speed hydraulic injection molding machine is no doublt a price smart choice for your IML project. There're many producers of high speed hydraulic injection molding machine manufacturers in China, among which the most popular would be:
A high speed hybrid injection molding machine will have more energy efficiency than a hydraulic injection molding machine, the popular hybrid injection molding machine made in China include:
As a solution of energy saving and clean production, an all electric injeciton molding machine would be the top choice for the IML production of thin-wall food package, the recommended brand would be:
Injection Molding Machine for IML Paint Buckets
As a deep cavity products, the production of an IML paint buckets will request the injection molding machine to have a larger opening stroke. To reduce the cost of the injection molding machine, some of the injection molding machine manufacturers from China custom designed the machine specialized for the production of IML paint bucket, among which include:
SW6712D-20
Unit: mm
| X1 | X2 | X3 | X4 | Y | YM1 | YM2 | Z | L | W | H | Payload | 1025 | 605 | 250 | 590 | 1200 | 475 | 725 | 2000 | 3020 | 1610 | 2050 | 8kg |
|---|
EOAT Assembly Demonstration -- One Cavity Car Threshold Strip Picking EOAT
Product Descriptions
Why So Many Cutlery Producers Will Choose a Submarine Gate Cold Runner Mold for Their Cutlery Auto-packing Solutions?
Plastic (PP + CA/PLA) cutlery of different size are widely used around the world with a booming demand of "Takeout" food in a fast-paced life nowadays. And as an easy to produce products more and more plastic factory owners joint this business. But for the new producers of cutlery, how to make your investment rewardable?
To producce a plastic cutlery (Knife, Forks and Spoon) the producer will need an injeciton molding machine, the mold and the automation system. For the automation system it could be a robot only for manually packing or robot + auto-packing system for a cutlery auto-packing system. For the mold the cutlery can either choose a hot runner mold or a cold runner mold. But more and more producer will choose a submarine gate cold runner mold, why?
The most important is the cost advantage of a submarine gate cold runner mold against a hot runner one. As a low value added products most of the cutlery producing system are low budget project, and reduction of the investment means an increase of the profit in the future.
For more ideas about a cutlery auto-packing solution please contact Adams from SWITEK to get a turn-key solution of cutlery packing.
