switek email

sales06@switek.biz

switek whatsapp

+86 186 5927 5869

Abonnieren Sie uns

.
Servo Hydraulic Injection Molding Machine 130SEIII -- Welltec Machinery Ltd.

Description Unit Value
INJECTION UNIT
Shot volume cm3 318
Shot weight g 289
Shot speed mm/s 205
Screw diameter mm 45
Injection pressure MPa 136
Screw L:D ratio -- 18.2
CLAMPING UNIT
Clamping force kN 1300
Opening Stroke mm 430
Space between tie bars mm x mm 410 x 410
Mold thickness(min) mm 145
Mold thickness(max) mm 450
Hydraulic ejection stroke mm 120
Hydraulic ejection force kN 41
POWER UNIT
Pump motor kW 72
Heating capacity kW 9.3
GENERAL
Oil tank capacity L 200

Platen Dimension

Machine Dimmension

# Value
A 1700 mm
B 1486 mm
C 1936 mm
D 3878 mm
E 4586 mm
F 1104 mm
G 1203 mm
H 650 mm
I 800 mm
J 660 mm
K 601.5 mm

As the center of the IML system, to choose an injection molding machine of which is the most suitable to your IML containers and mould design would be the key points to start a success IML project. Before the decision making of an injection molding machine for your project, you should keep in mind:
  • The material of which the IML containers to be produced from
  • The opening stroke of the injection molding machine
  • The expected cycle time of the system

For different parts, you can choose different type of injection molding machine according to your budget and expected daily output of the IML containers.

High Speed Injection Molding Machine for Think-wall Containers

  • High Speed Hydraulic Injection Molding Machine:

    For thin wall containers, a high speed hydraulic injection molding machine is no doublt a price smart choice for your IML project. There're many producers of high speed hydraulic injection molding machine manufacturers in China, among which the most popular would be:

    • Haitian MARS F/H series high speed injection molding machine
    • YIZUMI P/S3 series high speed injection molding machine
    • HMD SP series high speed injection molding machine
    • ChenHsong Speed-Pack series high speed injection molding machine
    • Golden Eagle GEKW/GS series high speed injection molding machine
    • Powerjet KF series of high speed injection molding machine
    • DAKUMA DKM/HH series high speed injection molding machine

  • Hybrid Injection Molding Machine

    A high speed hybrid injection molding machine will have more energy efficiency than a hydraulic injection molding machine, the popular hybrid injection molding machine made in China include:

    • Yizumi D1-E series of hybrid injection molding machine
    • Haida KDY series of high speed hybrid injection molding machine
    • FCS AF series hybrid injection molding machine
    • PowerJet JEV Series hybrid injection molding machine

  • All Electric Injection Molding Machine

    As a solution of energy saving and clean production, an all electric injeciton molding machine would be the top choice for the IML production of thin-wall food package, the recommended brand would be:

    • Zhafir ZE/VE series of all electric injection molding machine
    • Yizumi E series of high speed all electric injection molding machine
    • VALMO Real P series full electric injection molding machine
    • HMD EM Series full electric injection molding machine
    • LK ELETTRICA Series of full electric injection molding machine
    • BOLE FE Series all electric injection molding machine
    • WELLTEC D Series all electric injection molding machine

Injection Molding Machine for IML Paint Buckets

As a deep cavity products, the production of an IML paint buckets will request the injection molding machine to have a larger opening stroke. To reduce the cost of the injection molding machine, some of the injection molding machine manufacturers from China custom designed the machine specialized for the production of IML paint bucket, among which include:
  • HD B/U series of injection molding machine for IML paint bucket production
  • PowerJet PB series of injection molding machine for IML paint bucket production
  • LiSong GT/DT Series of injection molding machine for IML Paint bucket production
Best Buy Robotic Arm for Injection Molding Machine
injection robot

SW6310DS-20

injection robot

Unit: mm

X1 X2 X3 X4 Y YM1 YM2 Z L W H Payload
740 805 0 0 1000 235 765 1650 2640 1500 1580 3kg
The Application of End of Robotic Arm Tooling

EOAT Assembly Demonstration -- One Cavity In Mold Insertion EOAT With Mold Positioner

One Cavity In Mold Insertion EOAT With Mold Positioner

Product Descriptions

  • This EOAT is for One Cavity Parts Picking and In Mold Insertion;
  • The EOAT has Two Sides, One Side for Parts Picking, the Oter Side for In Mold Insertion;
  • The Parts Would be Picked by the Vacuum Cups and One Finger Angular Pneumatic Gripper;
  • The EOAT to be Drived by Three Air Circuits, One for the Cylinder, the Other for Finger Angular Pneumatic Gripper and the Third One for Mould Positioner;
  • The Gross Weight of the EOAT Seet is about 9kg.

Bom List

Product Name PN # Model Quantity
Extruded Profiles 4.Y00481 PEP2525-1500 1
Plugs for Profile 4.Y00070 PEP2525 8
Mould Positioner 8.Y00088 GMP20A 3
Vacuum Cups VS2 Series 1.Y05310 VS2-SA20 2
Rotative Suspensions 8.Y00061 VFR1421-G18 2
Pneumatic Finger Gripper 8.Y00084 GFR14-95G 7
Extension Tube 7.Y00733 SMBY14-50 6
Mounting Bracket 7.Y00200-T SMBE1-1440T 3
Cross Mounting Bracket for Profiles 7.Y00194-T SMBA-2525T 4
Vacuum Cup Fittings 7.Y00703 VM02-G18 2

Q & A About Robotic Arms and Injection Automation

Why is HMD270M8SPV One of the Best High Speed Hydraulic Injection Molding Machine for Small Size Containers IML Production?

As one of the best buy high speed hydraulic injection molding machine for thin-wall containers made in China, HMD270M8SPV is no doubt one an excellent injection molding machine for thin-wall containers high speed production. As the star injection molding machine by HMD group, HMD270M8SPV has the advangates below:

  • Improved platen with high rigidity structure, especially suitable for thin-wall containers IML production.
  • Parallel movement and high-speed/low pressure injection movement that shortens circle time, especially for thin wall products IML production.
  • High-speed hydraulic motor.
  • Opening stroke up to 560mm, suitable for the IML productions of containers with height up to 136mm.
  • Injection speed up to 368mm/s, with possible of a cycle time of IML production lower to 2s.

To match the excellent injection speed of HMD270M8SPV, the best IML robot would be SWITEK high speed side entry IML Robot SW833, with the control system by the European automation control system supplier SigmaTek, the dry cycle time of the IML robot can be lower than 2.1s, which will perfecctly match the productivity of HMD270M8SPV.

Email: sales06@switek.biz

WhatsApp

WeChat

Contact SWITEK Robot
Home
Plastic Machinery News

HuangYanZheng©Copy Right