sales06@switek.biz
+86 186 5927 5869
Détails du projet
| # | Nom | Valeur |
|---|---|---|
| 1 | Nom du produit | IMLCups |
| 2 | Matériel | PP |
| 3 | Cavités de moisissure | 6 |
| 4 | Durée du cycle | 6.5 |
| 5 | Robot IML | SW833-19 |
| 6 | IMM | 300 Ton |
| # | Nom | Valeur |
|---|---|---|
| 1 | Au temps du moule | 0.8~3 s |
| 2 | Durée du cycle de séchage | 2 s |
| 3 | Pouvoir | 6.2 (KVA) |
| 4 | Puissance d'entrée | AC220V/3P |
| 5 | Pression de travail | 5~7 |
| 6 | Consommation d'air | 10(NL/Cycle) |
| 7 | Poids net | 900 kg |
| 8 | Poids brut | 1500 kg |
| # | Nom | Valeur |
|---|---|---|
| 1 | X1 | 190 mm |
| 2 | X2 | 190 mm |
| 3 | Y | 400 mm |
| 4 | Z | 2100 mm |
| 5 | L | 2730 mm |
| 6 | W | 2410 mm |
| 7 | A | 1280 mm |
| 8 | B | 2260 mm |
| 9 | H | 1720 mm |
Vidéo IML
What Would be a SWITEK Turn-key 8 Cavities silicone Cartridge Tubes Side Entry IML Solutions Include?
With the advancement of the IML technology, more and more silicone cartridge producers choose to have an IML silicone cartridge tubes as the subsitution of the traditional off print silicone cartridge tubes. With an IML solutions, the silicone cartridge tubes producer will be able to produce an IML silicone cartridge tubes immediately after the injection process.
Generally for one set of silicone cartridge tubes there are 3 parts, the body of the silicone tube,the caps for the repeat use of the silicone sealant and the bottom block which you can push the sealant out. So for a standard turn-key IML solutions of an 8 cavities silicone cartridge tubes SWITEK will provide:
- Side entry IML Robot with 8 cavities magazine + EOAT Sets for IML production of silicone cartridge tubes.
- 8 Cavities hot runner mold for silliocne cartridge tubes body. The injection molding machine to recommend for this part would be YIZUMI UN350A5-EU high end servo injection molding machine, HAIDA HD330L servo injection molding machine and HaiTian MA3800 servo injection molding machine.
- 16 Cavities hot runner mold for bottom block. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.
- 32 Cavities hot runner mold for caps. The injection molding machine to recommend for this part would be Haitian MA1600 servo injection molding machine, Haida HD170L servo injection molding machine and YIZUMI UN160A5-EU high end servo injection molding machine.
For the injection molding machine the silicone cartridge producer can choose to buy from the local distributors or have SWITEK to buy it as part of the turn-key IML solutions.
For more information about a turn-key IML solution for Silicone cartridge tube please feel free to contact Adams from SWITEK Automation for a professional proposal of a ready to work IML system for IML Silicone cartridge production.
