ZE3800F/1700-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1077
Shot weight	g	0
Shot speed	mm/s	350
Screw diameter	mm	70
Injection pressure	MPa	169
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	3800
Opening Stroke	mm	700
Space between tie bars	mm x mm	770 x 770
Mold thickness(min)	mm	300
Mold thickness(max)	mm	710
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	69
POWER UNIT
Pump motor	kW	249
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	135

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	8216 mm
B	1754 mm
C	610 mm
D	250 mm
E	2095 mm
F	4 x M10 L20
G	115 mm
H	148 mm
J	φ80 mm
K	115 mm
L	217 mm
M	φ4 mm
N	SR10

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions