ZE3800F/1700-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	929
Shot weight	g	0
Shot speed	mm/s	350
Screw diameter	mm	65
Injection pressure	MPa	196
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	3800
Opening Stroke	mm	700
Space between tie bars	mm x mm	770 x 770
Mold thickness(min)	mm	300
Mold thickness(max)	mm	710
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	69
POWER UNIT
Pump motor	kW	249
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	135

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	8216 mm
B	1754 mm
C	610 mm
D	250 mm
E	2095 mm
F	4 x M10 L20
G	115 mm
H	148 mm
J	φ80 mm
K	115 mm
L	217 mm
M	φ4 mm
N	SR10

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions