ZE3800F/1700-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	791
Shot weight	g	0
Shot speed	mm/s	160
Screw diameter	mm	60
Injection pressure	MPa	230
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	3800
Opening Stroke	mm	700
Space between tie bars	mm x mm	770 x 770
Mold thickness(min)	mm	300
Mold thickness(max)	mm	710
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	69
POWER UNIT
Pump motor	kW	172
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	135

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	8216 mm
B	1754 mm
C	610 mm
D	250 mm
E	2095 mm
F	4 x M10 L20
G	115 mm
H	148 mm
J	φ80 mm
K	115 mm
L	217 mm
M	φ4 mm
N	SR10

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions