ZE3800F/1400-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	735
Shot weight	g	0
Shot speed	mm/s	350
Screw diameter	mm	60
Injection pressure	MPa	193
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	3800
Opening Stroke	mm	700
Space between tie bars	mm x mm	770 x 770
Mold thickness(min)	mm	300
Mold thickness(max)	mm	710
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	69
POWER UNIT
Pump motor	kW	207
Heating capacity	kW	0
GENERAL
Oil tank capacity	L	135

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	8044 mm
B	1615 mm
C	610 mm
D	251 mm
E	2095 mm
F	4 x M10 L20
G	115 mm
H	149 mm
J	φ80 mm
K	115 mm
L	184 mm
M	φ4 mm
N	SR10

Roboplas onshow 2 cavities 1.2 litter buckets side entry IML Solutions with handle assembly at Fakuma 2017.

The globalized increasing of the labour cost make it more and more difficult to make profit for low value added prarts producing. Automation of the production process would be the best way. It's no doubt that to have the handles assembled immediately after the buckets IML produced will increase the production efficiency dramatically. The Roboplas 2 Cavitites buckets IML solutions with handle assembly for sure is an ideal choice for the buckets producers.

As for similar project of a smaller budget, the IML containers can consider a turn-key system made in China. With a complete supplier chain in China and much lower labour cost compared to their European counter parts, SWITEK IML Solutions will provide a system with the cost of only around 35%~45% of their European counter parts and life long online technical support. With a turn-key solution, the mould and the IML automation system would be well tested in China before delivery to ensure that you'll receive a system of buckets IML production with handle assembly ready to work.

Turn-key IML Solutions