ZE1500F/430HB -- Zhafir High Speed All Electric HaiTian Injection Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	213
Shot weight	g	0
Shot speed	mm/s	350
Screw diameter	mm	40
Injection pressure	MPa	200
Screw L:D ratio	--	25:1
CLAMPING UNIT
Clamping force	kN	1500
Opening Stroke	mm	420
Space between tie bars	mm x mm	520 x 520
Mold thickness(min)	mm	180
Mold thickness(max)	mm	520
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	33
POWER UNIT
Pump motor	kW	99
Heating capacity	kW	17.5
GENERAL
Oil tank capacity	L	93

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	5654 mm
B	1093 mm
C	400 mm
D	224 mm
E	1815 mm
F	4 x M8 L15
G	85 mm
H	135 mm
J	φ50 mm
K	70 mm
L	99 mm
M	φ4 mm
N	SR10

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions