U438TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1965
Shot weight	g	1788
Shot speed	mm/s	194
Screw diameter	mm	80
Injection pressure	MPa	137
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	4380
Opening Stroke	mm	740
Space between tie bars	mm x mm	765 x 765
Mold thickness(min)	mm	280
Mold thickness(max)	mm	780
Hydraulic ejection stroke	mm	170
Hydraulic ejection force	kN	90
POWER UNIT
Pump motor	kW	45
Heating capacity	kW	33.6
GENERAL
Oil tank capacity	L	750

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	7550 mm
B	3975 mm
C	70 mm
D	510 mm
E	60 mm
F	200 mm
G	800 mm
H	800 mm
I	800 mm
J	1225 mm
K	300 mm
L	1455 mm
M	1545 mm
N	200 mm
O	60 mm
P	870 mm

SWITEK finished the in house testing of two cavities juice extractor cover top entry IML system for the production of juice extractor covery by the technology of IML.

The new system is an economic solution for thick wall products IML production. With SWITEK 3 axis servo injection robot SW7312DS as the core injection robot to finish the process of label picking, insertion, parts picking, the cost of the top entry IML solutions is much lower than its side entry counter parts.

The tips for a top entry IML solutions:

To ensure that the robot has sufficient payload, it's the core of a stable IML system
To ensure that the mould design is friendly to IML production. The mould structure for IML is different from the mould for parts of non-IML, an excellent mould design is the key to a successful IML system.
A top entry IML system is only suitable for a low speed system. Because a top entry IML system request that the 3 axis servo robot to do all the label picking, inserting, parts picking and droping of an IML system, it'll request a much longer in mold time compared to its counter part.

Turn-key IML Solutions