U265TS -- Sonly High Energy Saving High Precision Servo Injection Molding Machine Made In China

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	915
Shot weight	g	833
Shot speed	mm/s	190
Screw diameter	mm	65
Injection pressure	MPa	132
Screw L:D ratio	--	21
CLAMPING UNIT
Clamping force	kN	2650
Opening Stroke	mm	560
Space between tie bars	mm x mm	585 x 565
Mold thickness(min)	mm	200
Mold thickness(max)	mm	600
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	70
POWER UNIT
Pump motor	kW	22
Heating capacity	kW	24.7
GENERAL
Oil tank capacity	L	300

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	6450 mm
B	3430 mm
C	735 mm
D	390 mm
E	60 mm
F	2000 mm
G	1510 mm
H	1290 mm
I	765 mm
J	2400 mm
K	4920 mm
L	1920 mm
M	1060 mm
N	1100 mm
O	1600 mm

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions