Systec 500/920 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1779
Shot weight	g	1619
Shot speed	mm/s	320
Screw diameter	mm	80
Injection pressure	MPa	186
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	5000
Opening Stroke	mm	850
Space between tie bars	mm x mm	920 x 920
Mold thickness(min)	mm	400
Mold thickness(max)	mm	920
Hydraulic ejection stroke	mm	260
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	182
Heating capacity	kW	31
GENERAL
Oil tank capacity	L	820

Platen Dimension

Machine Dimmension

#	Value
A	292 mm
B	0 mm
C	0 mm
D Max	2193 mm
E	4797 mm
L	9225 mm
M Min	8990 mm

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions