Systec 420/820 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	763
Shot weight	g	557
Shot speed	mm/s	450
Screw diameter	mm	60
Injection pressure	MPa	191
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	4200
Opening Stroke	mm	770
Space between tie bars	mm x mm	820 x 820
Mold thickness(min)	mm	380
Mold thickness(max)	mm	825
Hydraulic ejection stroke	mm	230
Hydraulic ejection force	kN	96
POWER UNIT
Pump motor	kW	123
Heating capacity	kW	27.9
GENERAL
Oil tank capacity	L	820

Platen Dimension

Machine Dimmension

#	Value
A	257 mm
B	-3 mm
C	1105 mm
D Max	1795 mm
G	2469 mm
M	8025 mm
F Min	1243 mm
S	305 mm
SH	2291 mm

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions