Systec 280/630 C SP -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	358
Shot weight	g	326
Shot speed	mm/s	550
Screw diameter	mm	45
Injection pressure	MPa	241
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	2800
Opening Stroke	mm	675
Space between tie bars	mm x mm	630 x 630
Mold thickness(min)	mm	330
Mold thickness(max)	mm	710
Hydraulic ejection stroke	mm	200
Hydraulic ejection force	kN	73
POWER UNIT
Pump motor	kW	99
Heating capacity	kW	13
GENERAL
Oil tank capacity	L	580

Platen Dimension

Machine Dimmension

#	Value
A	222 mm
B	86 mm
C	990 mm
D Max	1648 mm
G	2244 mm
M	6673 mm
F Min	1118 mm
S	33 mm
SH	1762 mm

SWITEK Turn-key 8 Cavities Cups Side Entry IML Solutions with Vision Control + Packing Solutions

Starting from $285,714

GECH IML on show turn-key IML solutions of 8 cavities Yogurt cups high speed IML production with vision control at a cycle time of 5.5s with YZY IML label and Brosen Mold by Welltec high speed injection molding machine TTI-353Sec.

The IML system is in production of Yogurt cups with a containing capacity of 100g, which is one of the most popular design of extreme thin-wall container with a thickness of 0.55mm for dairy products. And the total cycle time of 5.5s will promise the productivity of the system. It's no doubt that GECH IML has done a great job in this solutions.

The counter part of the GECH 8 cavities cups side entry IML solution, SWITEK IML Solutions in production provided not noly the vision control but also packing solutions to the IML cups producers. As a system for the production of food package, the prevention of secondary polution tend to be very important to ensure the food safety. So a system free from humam contact from injection to packing is no doubt an ideal solution.

Turn-key IML Solutions