Systec 210/580 -- Sumitomo High Speed Injection Molding Machine and IML Solutions

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	358
Shot weight	g	326
Shot speed	mm/s	550
Screw diameter	mm	45
Injection pressure	MPa	240
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	2100
Opening Stroke	mm	575
Space between tie bars	mm x mm	580 x 580
Mold thickness(min)	mm	340
Mold thickness(max)	mm	690
Hydraulic ejection stroke	mm	180
Hydraulic ejection force	kN	73
POWER UNIT
Pump motor	kW	99
Heating capacity	kW	13
GENERAL
Oil tank capacity	L	420

Platen Dimension

Machine Dimmension

#	Value
A	157 mm
B	456 mm
C	921 mm
D Max	1580 mm
G	2144 mm
M	6479 mm
F Min	934 mm
S	237 mm
SH	1667 mm

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions