Systec 160/520 -- Sumitomo High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	358
Shot weight	g	261
Shot speed	mm/s	550
Screw diameter	mm	45
Injection pressure	MPa	240
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	1600
Opening Stroke	mm	500
Space between tie bars	mm x mm	520 x 520
Mold thickness(min)	mm	275
Mold thickness(max)	mm	585
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	59
POWER UNIT
Pump motor	kW	96
Heating capacity	kW	15.7
GENERAL
Oil tank capacity	L	380

Platen Dimension

Machine Dimmension

#	Value
A	222 mm
B	666 mm
C	890 mm
D Max	1548 mm
G	2116 mm
M	6068 mm
F Min	1118 mm
S	237 mm
SH	1666 mm

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions