Systec 160/520 -- Sumitomo High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	255
Shot weight	g	232
Shot speed	mm/s	610
Screw diameter	mm	40
Injection pressure	MPa	242
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	1600
Opening Stroke	mm	500
Space between tie bars	mm x mm	520 x 520
Mold thickness(min)	mm	275
Mold thickness(max)	mm	585
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	59
POWER UNIT
Pump motor	kW	78
Heating capacity	kW	11.1
GENERAL
Oil tank capacity	L	380

Platen Dimension

Machine Dimmension

#	Value
A	157 mm
B	-14 mm
C	912 mm
D Max	1625 mm
G	2214 mm
M	5398 mm
F Min	1085 mm
S	237 mm
SH	1151 mm

SA-290H is a high speed hydraulic energy-saving injection molding machine produced by FCS Machinery for the production of thin-wall food containers, bubble teacup and bubble teacup lids. The clamping force of this series of hydraulic high speed injection molding machine is range from 220Ton ~ 500T.

For thin-wall containers production, the efficiency of the system would be the key to your profit. Here I'll recommend the high speed 3 axis servo injection robot SW7112DS, with a dry cycle of 3.3s and payload up to 3kg, SW7112DS is an ideal robot for the high speed injection molding machine with a clamping force from 150Ton ~ 450Tons.

Turn-key IML Solutions