MARS 860/260G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	153
Shot weight	g	139
Shot speed	mm/s	98
Screw diameter	mm	36
Injection pressure	MPa	173
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	860
Opening Stroke	mm	310
Space between tie bars	mm x mm	360 x 360
Mold thickness(min)	mm	150
Mold thickness(max)	mm	360
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	kN	33
POWER UNIT
Pump motor	kW	11
Heating capacity	kW	7.6
GENERAL
Oil tank capacity	L	170

Platen Dimensions

Machine Dimmension

SWITEK Turn-key 8 Cavities Cups Side Entry IML Solutions with Vision Control + Packing Solutions

Starting from $285,714

GECH IML on show turn-key IML solutions of 8 cavities Yogurt cups high speed IML production with vision control at a cycle time of 5.5s with YZY IML label and Brosen Mold by Welltec high speed injection molding machine TTI-353Sec.

The IML system is in production of Yogurt cups with a containing capacity of 100g, which is one of the most popular design of extreme thin-wall container with a thickness of 0.55mm for dairy products. And the total cycle time of 5.5s will promise the productivity of the system. It's no doubt that GECH IML has done a great job in this solutions.

The counter part of the GECH 8 cavities cups side entry IML solution, SWITEK IML Solutions in production provided not noly the vision control but also packing solutions to the IML cups producers. As a system for the production of food package, the prevention of secondary polution tend to be very important to ensure the food safety. So a system free from humam contact from injection to packing is no doubt an ideal solution.

Turn-key IML Solutions