MARS 7800/6350G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2799
Shot weight	g	2547
Shot speed	mm/s	543
Screw diameter	mm	90
Injection pressure	MPa	228
Screw L:D ratio	--	24.4
CLAMPING UNIT
Clamping force	kN	7800
Opening Stroke	mm	980
Space between tie bars	mm x mm	980 x 980
Mold thickness(min)	mm	400
Mold thickness(max)	mm	980
Hydraulic ejection stroke	mm	260
Hydraulic ejection force	kN	186
POWER UNIT
Pump motor	kW	77
Heating capacity	kW	67.8
GENERAL
Oil tank capacity	L	1350

Platen Dimensions

Machine Dimmension

Hwamda Machinery has a new two platen servo injection molding machine HMD DU2100 started up in a large size dustbin injection production project without injection robot.

With European two platen injection unit, HMD DU2100 is an excellent injection molding machine for deepcavity products. In this project the machine started up without an injection robot. To maxmize the productity and for production safety, the better solution would be with a SWITEK 3 axis servo injection robot SW7518DS to pick and stack the dustbin. With a payload up to 15kg, SWITEK is an ideal choice for this project.

As a two platen injection molding machine, Hwamda HMD DU2100 provide sufficient clamping force with excellent opening stroke for deep cavity product but much shorter in length, will help to reduce the floor installation space with a maximized per square meter productivity. It's a price smart investiment for the productivity of deep cavity products.

Turn-key IML Solutions