MARS 5300/4000G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2497
Shot weight	g	2272
Shot speed	mm/s	553
Screw diameter	mm	85
Injection pressure	MPa	159
Screw L:D ratio	--	20.7
CLAMPING UNIT
Clamping force	kN	5300
Opening Stroke	mm	825
Space between tie bars	mm x mm	830 x 800
Mold thickness(min)	mm	350
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	200
Hydraulic ejection force	kN	158
POWER UNIT
Pump motor	kW	55
Heating capacity	kW	45.65
GENERAL
Oil tank capacity	L	990

Platen Dimensions

Machine Dimmension

The new FORZA series two platen injection molding machine FA1400 by Ningbo LK Technology Co., Ltd. was installed for the production of plastic chairs with robot picking.

For furniture production it's demanding on the surface of the parts with novelty design. With precise injection the new FORZA series two platen injecdtion molding machine FA1400 can produce the perfac injection surface to meet the stringent requirements in furniture production. With a heavy duty injection robot to provide a turn-key plastic chairs production to customer.

For an injection molding machine of 1400T clamping force, an injection robot with a payload of 15kg would be sufficient for the parts picking. The robot for this application would be SWITEK 3 axis servo injection robot SW7518DS which has a payload of 15kg and is suitable for injection molding machine 650~1800T.

Turn-key IML Solutions