High Speed Hydraulic Injection Molding Machine MA4500F -- HaiTian Group

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	617
Shot weight	g	562
Shot speed	mm/s	500
Screw diameter	mm	55
Injection pressure	MPa	161
Screw L:D ratio	--	25
CLAMPING UNIT
Clamping force	kN	4500
Opening Stroke	mm	720
Space between tie bars	mm x mm	730 x 730
Mold thickness(min)	mm	300
Mold thickness(max)	mm	750
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	116
Heating capacity	kW	40
GENERAL
Oil tank capacity	L	825

Platen Dimensions

Machine Dimmension

SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.

For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.

Turn-key IML Solutions