MARS 1200/3700G -- HaiTian Mars.G Series Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	173
Shot weight	g	157
Shot speed	mm/s	89
Screw diameter	mm	36
Injection pressure	MPa	210
Screw L:D ratio	--	23.3
CLAMPING UNIT
Clamping force	kN	1200
Opening Stroke	mm	350
Space between tie bars	mm x mm	410 x 410
Mold thickness(min)	mm	150
Mold thickness(max)	mm	430
Hydraulic ejection stroke	mm	120
Hydraulic ejection force	kN	33
POWER UNIT
Pump motor	kW	13
Heating capacity	kW	11.55
GENERAL
Oil tank capacity	L	220

Platen Dimensions

Machine Dimmension

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions