LS170/470G -- High Speed IML Packaging Injection Molding Machine by Lisong Machinery

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	366
Shot weight	g	333
Shot speed	mm/s	333
Screw diameter	mm	45
Injection pressure	MPa	173
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	1700
Opening Stroke	mm	430
Space between tie bars	mm x mm	470 x 410
Mold thickness(min)	mm	180
Mold thickness(max)	mm	520
Hydraulic ejection stroke	mm	140
Hydraulic ejection force	kN	67
POWER UNIT
Pump motor	kW	53
Heating capacity	kW	16.3
GENERAL
Oil tank capacity	L	320

Special Features

Optimized Toggle Unit Design
Cam-ring Mechanism
Multistage Ejector
Larger Space for Mold
Large-sized Linear Guide Rail Support
The Advanced Control Interface
Closed-loop PID Temperature Controller
Efficient Injection Structure
Precise Linear Guide ail
Servo Motor and Drive
Injection Molding Machine for IML Solutions

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions