JU9000III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	4006
Shot weight	g	3645
Shot speed	mm/s	762
Screw diameter	mm	100
Injection pressure	MPa	196
Screw L:D ratio	--	24.2
CLAMPING UNIT
Clamping force	kN	9000
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1180 x 1000
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1100
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	75
Heating capacity	kW	54
GENERAL
Oil tank capacity	L	960

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2398 mm
B	2286 mm
C	2850 mm
D	2265 mm
E	1627 mm
F	1577 mm
G	1228 mm
H	1102 mm
I	544 mm
J	4512 mm
K	5021 mm
M	3857 mm
N	1740

Arge top entry IML robot installed for the production of IML pails with parts dropped freely.

The ARGE top entry IML robot for pail IML production is a price smart solution to have the pails produced in a smaller injection molding machine but have the finished parts free dropped. Since the production of an IML pails request the robots to pick the parts and place the label synchronous or asynchronously, it request a much wider opening stroke of the injection molding machine compared the producton of unlabeled bucket. But the asynchronous two steps system will increase the in mold time. A top entry solution with the IML pails free dropped would be a compromise of the production efficiency and the parts quality.

Anyway, for a top entry IML robot for pail buckets IML production, an asynchronous two steps IML system is a much more popular solution which will well balance the productivity and quality of the IML system.

Turn-key IML Solutions