JU7500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2990
Shot weight	g	2721
Shot speed	mm/s	642
Screw diameter	mm	90
Injection pressure	MPa	193
Screw L:D ratio	--	24.4
CLAMPING UNIT
Clamping force	kN	7500
Opening Stroke	mm	1400
Space between tie bars	mm x mm	1110 x 960
Mold thickness(min)	mm	450
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	85
Heating capacity	kW	71
GENERAL
Oil tank capacity	L	780

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2208 mm
B	2106 mm
C	2700 mm
D	2200 mm
E	1506 mm
F	1354 mm
G	1198 mm
H	1042 mm
I	544 mm
J	4055 mm
K	4689 mm
M	3450 mm
N	1607

Arburg show cased its all electric injection molding machine "ULTIMATE ALL AROUNDER 720A" with a 4 cavities thin-wall cups IML solution at the total cycle time of 3.95second.

The new all electric packaging machine can produce IML thin-wall cups with a wall thickness of just 0.37 millimetres. Besides this, a variety of new technic applied to the new system. Driven with all-electric and working in combination with injection compression moulding, the energy footprint could be improved by 20 percent and the component weight has dropped significantly from 13 to 10.8grams. With the special "next Cycle IML" technology, the label on the IML product can be completely separated from the cup's PP during recycling.

Turn-key IML Solutions