JU7500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	4467
Shot weight	g	4065
Shot speed	mm/s	960
Screw diameter	mm	110
Injection pressure	MPa	129
Screw L:D ratio	--	20
CLAMPING UNIT
Clamping force	kN	7500
Opening Stroke	mm	1400
Space between tie bars	mm x mm	1110 x 960
Mold thickness(min)	mm	450
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	195
POWER UNIT
Pump motor	kW	85
Heating capacity	kW	71
GENERAL
Oil tank capacity	L	780

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2208 mm
B	2106 mm
C	2700 mm
D	2200 mm
E	1506 mm
F	1354 mm
G	1198 mm
H	1042 mm
I	544 mm
J	4055 mm
K	4689 mm
M	3450 mm
N	1607

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions