JU6500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2799
Shot weight	g	2547
Shot speed	mm/s	665
Screw diameter	mm	90
Injection pressure	MPa	143
Screw L:D ratio	--	19.6
CLAMPING UNIT
Clamping force	kN	6500
Opening Stroke	mm	1350
Space between tie bars	mm x mm	1040 x 910
Mold thickness(min)	mm	400
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	65
Heating capacity	kW	48
GENERAL
Oil tank capacity	L	600

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2671 mm
D	2200 mm
E	1290 mm
F	1290
G	1177 mm
H	943 mm
I	675 mm
J	3746 mm
K	3909 mm
M	3191 mm
N	1560

Hwamda Machinery has a new two platen servo injection molding machine HMD DU2100 started up in a large size dustbin injection production project without injection robot.

With European two platen injection unit, HMD DU2100 is an excellent injection molding machine for deepcavity products. In this project the machine started up without an injection robot. To maxmize the productity and for production safety, the better solution would be with a SWITEK 3 axis servo injection robot SW7518DS to pick and stack the dustbin. With a payload up to 15kg, SWITEK is an ideal choice for this project.

As a two platen injection molding machine, Hwamda HMD DU2100 provide sufficient clamping force with excellent opening stroke for deep cavity product but much shorter in length, will help to reduce the floor installation space with a maximized per square meter productivity. It's a price smart investiment for the productivity of deep cavity products.

Turn-key IML Solutions