JU6500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3456
Shot weight	g	3145
Shot speed	mm/s	821
Screw diameter	mm	100
Injection pressure	MPa	116
Screw L:D ratio	--	17.6
CLAMPING UNIT
Clamping force	kN	6500
Opening Stroke	mm	1350
Space between tie bars	mm x mm	1040 x 910
Mold thickness(min)	mm	400
Mold thickness(max)	mm	950
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	65
Heating capacity	kW	48
GENERAL
Oil tank capacity	L	600

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2165 mm
B	2066 mm
C	2671 mm
D	2200 mm
E	1290 mm
F	1290
G	1177 mm
H	943 mm
I	675 mm
J	3746 mm
K	3909 mm
M	3191 mm
N	1560

Arge top entry IML robot installed for the production of IML pails with parts dropped freely.

The ARGE top entry IML robot for pail IML production is a price smart solution to have the pails produced in a smaller injection molding machine but have the finished parts free dropped. Since the production of an IML pails request the robots to pick the parts and place the label synchronous or asynchronously, it request a much wider opening stroke of the injection molding machine compared the producton of unlabeled bucket. But the asynchronous two steps system will increase the in mold time. A top entry solution with the IML pails free dropped would be a compromise of the production efficiency and the parts quality.

Anyway, for a top entry IML robot for pail buckets IML production, an asynchronous two steps IML system is a much more popular solution which will well balance the productivity and quality of the IML system.

Turn-key IML Solutions