JU5500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1619
Shot weight	g	1473
Shot speed	mm/s	563
Screw diameter	mm	80
Injection pressure	MPa	120
Screw L:D ratio	--	17.5
CLAMPING UNIT
Clamping force	kN	5500
Opening Stroke	mm	1300
Space between tie bars	mm x mm	920 x 830
Mold thickness(min)	mm	350
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	45
Heating capacity	kW	33
GENERAL
Oil tank capacity	L	450

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2110 mm
B	2016 mm
C	2327 mm
D	2250 mm
E	1175 mm
F	1175
G	1082 mm
H	903 mm
I	675 mm
J	3581 mm
K	3705 mm
M	3056 mm
N	1400

Welltec in house testing their new two-color injection molding machine 160P in 8 cavities closures production.

The new two-tone injection molding machine by Welltec is optional with vertical, parallel, piggyback arrangements to accomodate multi-component, multi-color injection production. With the rotary platen controlled by servo motor and extra wide tie bar spacing, it's an ideal injection molding machine for the production of 2 color parts.

With 2 sets of independent injection units, the size of two tone injection molding machine will generally larger than a regular servo injection molding machine, it would be very important that when you're choosing a robot for this kind of injection molding machine ,the length of the traverse stroke would be much longer compared to the regular injection molding machine of the same clamping force. In this case the robot for Welltec 160p should be SWITEK 3 Axis servo injection robot SW6308DS-20.

Turn-key IML Solutions