JU4500III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1424
Shot weight	g	1296
Shot speed	mm/s	385
Screw diameter	mm	70
Injection pressure	MPa	208
Screw L:D ratio	--	22.9
CLAMPING UNIT
Clamping force	kN	4500
Opening Stroke	mm	1050
Space between tie bars	mm x mm	810 x 800
Mold thickness(min)	mm	350
Mold thickness(max)	mm	850
Hydraulic ejection stroke	mm	250
Hydraulic ejection force	kN	110
POWER UNIT
Pump motor	kW	45
Heating capacity	kW	33
GENERAL
Oil tank capacity	L	450

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2070 mm
B	1986 mm
C	2317 mm
D	2300 mm
E	1084 mm
F	1084
G	1082 mm
H	903 mm
I	675 mm
J	3269 mm
K	3597 mm
M	2774 mm
N	1248

2 Cavities Sweat Box 5 Faces Labeling Side Entry IML Solution

SWITEK engineer finished the installation of a 4 cavities magazine of box 5 faces labeling installed to an old IML robot and started up in Chile.

The new installation service of our engineer in Chile is for the upgrading of the IML system which our clients have for a new market with the minimum investment by only replace the magazine and EOAT to switch the IML system from the production of one container to the other. With onsite installation and maintenance service from SWITEK, our clients will get a renewed IML system of efficient and stable.

As one of leading IML solutions provider growing up from the fast changing Chinese market, SWITEK engineers will always have "upgradable" ideal as the guideline of an IML system because our clients are challenging in a fast changing market, which means that they're allowed to upgrade their system immediately to provide their customer a new package. Designed under this mechanism, the SW8 series of IML robot if one of the best choice for small and medium sized producers of IML containers.

Turn-key IML Solutions