JU10800III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	6769
Shot weight	g	6160
Shot speed	mm/s	1288
Screw diameter	mm	130
Injection pressure	MPa	116
Screw L:D ratio	--	18.6
CLAMPING UNIT
Clamping force	kN	10800
Opening Stroke	mm	1900
Space between tie bars	mm x mm	1260 x 1100
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1200
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	230
POWER UNIT
Pump motor	kW	112
Heating capacity	kW	83
GENERAL
Oil tank capacity	L	960

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	2850 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1228 mm
H	1102 mm
I	544 mm
J	4699 mm
K	4689 mm
M	4014 mm
N	1840

Arge Robotik 3 axis top entry IML robot installed for the production of 12L rectangular IML Buckets.

The IML robot installed is a solution for the production of 12L rectangular IML buckets. Unlike the round bucket, the rectangular buckets has four angels and is not easy to have it well labeled, to solve this problem, 3 brushes were added for a better wrapping of the lables. With different type of label material, different static scheme would be applied.

As the competitor of Arge robotik, SWITEK Automation had been providing the turn-key IML Solutions since 2009. For an IML solution for injection molding machine around 450T, the IML robot can be SWITEK SW7312DS, which has a payload up to 8kg, is a perfect robot for small and medium size containers top entry IML System.

Turn-key IML Solutions