JU10800III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	5227
Shot weight	g	4756
Shot speed	mm/s	924
Screw diameter	mm	110
Injection pressure	MPa	190
Screw L:D ratio	--	26.2
CLAMPING UNIT
Clamping force	kN	10800
Opening Stroke	mm	1900
Space between tie bars	mm x mm	1260 x 1100
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1200
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	230
POWER UNIT
Pump motor	kW	130
Heating capacity	kW	104
GENERAL
Oil tank capacity	L	1250

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	4180 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1318 mm
H	1212 mm
I	544 mm
J	4699 mm
K	4913 mm
M	4014 mm
N	1840

SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.

For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.

Turn-key IML Solutions