JU10800III -- HaiTian JUPITER Two-Platens Servo Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	7300
Shot weight	g	6643
Shot speed	mm/s	1291
Screw diameter	mm	130
Injection pressure	MPa	136
Screw L:D ratio	--	22.2
CLAMPING UNIT
Clamping force	kN	10800
Opening Stroke	mm	1900
Space between tie bars	mm x mm	1260 x 1100
Mold thickness(min)	mm	500
Mold thickness(max)	mm	1200
Hydraulic ejection stroke	mm	350
Hydraulic ejection force	kN	230
POWER UNIT
Pump motor	kW	130
Heating capacity	kW	104
GENERAL
Oil tank capacity	L	1250

Clamping Unit

Platen Dimensions

Robot

Front View

Top View

Side View

#	Value
A	2470 mm
B	2351 mm
C	4180 mm
D	2250 mm
E	1676 mm
F	1625 mm
G	1318 mm
H	1212 mm
I	544 mm
J	4699 mm
K	4913 mm
M	4014 mm
N	1840

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions