JM328-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1181
Shot weight	g	1075
Shot speed	mm/s	376
Screw diameter	mm	67
Injection pressure	MPa	185
Screw L:D ratio	--	21
CLAMPING UNIT
Clamping force	kN	3280
Opening Stroke	mm	660
Space between tie bars	mm x mm	680 x 680
Mold thickness(min)	mm	225
Mold thickness(max)	mm	680
Hydraulic ejection stroke	mm	180
Hydraulic ejection force	kN	11
POWER UNIT
Pump motor	kW	48
Heating capacity	kW	26
GENERAL
Oil tank capacity	L	580

Platen Dimension

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions