JM168-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	304
Shot weight	g	276
Shot speed	mm/s	138
Screw diameter	mm	41
Injection pressure	MPa	232
Screw L:D ratio	--	23.6
CLAMPING UNIT
Clamping force	kN	1680
Opening Stroke	mm	450
Space between tie bars	mm x mm	470 x 470
Mold thickness(min)	mm	170
Mold thickness(max)	mm	520
Hydraulic ejection stroke	mm	140
Hydraulic ejection force	kN	4
POWER UNIT
Pump motor	kW	22
Heating capacity	kW	12.9
GENERAL
Oil tank capacity	L	250

Platen Dimension

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions