JM1650-MK6 -- Chenhsong High Precision Hydraulic Servo Injection Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	10770
Shot weight	g	9801
Shot speed	mm/s	1390
Screw diameter	mm	140
Injection pressure	MPa	177
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	16500
Opening Stroke	mm	1600
Space between tie bars	mm x mm	1550 x 1430
Mold thickness(min)	mm	750
Mold thickness(max)	mm	1500
Hydraulic ejection stroke	mm	400
Hydraulic ejection force	kN	35
POWER UNIT
Pump motor	kW	214
Heating capacity	kW	95.4
GENERAL
Oil tank capacity	L	2000

Platen Dimension

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions