Two Platen Injection Molding Machine FA750 -- LK Technology Holidings Limited

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	2496
Shot weight	g	2271
Shot speed	mm/s	716
Screw diameter	mm	85
Injection pressure	MPa	204
Screw L:D ratio	--	24
CLAMPING UNIT
Clamping force	kN	7500
Opening Stroke	mm	1400
Space between tie bars	mm x mm	1150 x 980
Mold thickness(min)	mm	450
Mold thickness(max)	mm	1050
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	260
POWER UNIT
Pump motor	kW	144
Heating capacity	kW	41
GENERAL
Oil tank capacity	L	1250

Platen Dimension

Machine Dimmension

#	Value
A	2892 mm
B	1452 mm
C	1440 mm
D	1377 mm
E	1377 mm
F	1850 mm
G	1400 mm
H	1498 mm
I	2240 mm
J	1500 mm
K	1730 mm
L	2385 mm
M	2199 mm
N	2170 mm

SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.

For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.

Turn-key IML Solutions