Two Platen Injection Molding Machine FA2500 -- LK Technology Holidings Limited

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	12309
Shot weight	g	11201
Shot speed	mm/s	1418
Screw diameter	mm	140
Injection pressure	MPa	206
Screw L:D ratio	--	24
CLAMPING UNIT
Clamping force	kN	25000
Opening Stroke	mm	3000
Space between tie bars	mm x mm	1900 x 1700
Mold thickness(min)	mm	800
Mold thickness(max)	mm	1800
Hydraulic ejection stroke	mm	550
Hydraulic ejection force	kN	660
POWER UNIT
Pump motor	kW	288
Heating capacity	kW	112
GENERAL
Oil tank capacity	L	2500

Platen Dimension

Machine Dimmension

#	Value
A	4357 mm
B	2216 mm
C	2141 mm
D	1964 mm
E	1964 mm
F	3800 mm
G	3000 mm
H	1579 mm
I	2232 mm
J	2232 mm
K	2185 mm
L	3611 mm
M	2326 mm
N	3345 mm

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions