Two Platen Injection Molding Machine FA2000 -- LK Technology Holidings Limited

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	14130
Shot weight	g	12858
Shot speed	mm/s	1628
Screw diameter	mm	150
Injection pressure	MPa	179
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	20000
Opening Stroke	mm	2800
Space between tie bars	mm x mm	1800 x 1600
Mold thickness(min)	mm	800
Mold thickness(max)	mm	1700
Hydraulic ejection stroke	mm	450
Hydraulic ejection force	kN	660
POWER UNIT
Pump motor	kW	288
Heating capacity	kW	112
GENERAL
Oil tank capacity	L	2500

Platen Dimension

Machine Dimmension

#	Value
A	4311 mm
B	2193 mm
C	2118 mm
D	1941 mm
E	1941 mm
F	3600 mm
G	2800 mm
H	1579 mm
I	2232 mm
J	2125 mm
K	2485 mm
L	3455 mm
M	2326 mm
N	3215 mm

High Performance Side Entry IML Robot

In the just finished InterPlas Thailand 2024, YIZUMI show cased turn-key IML solutions of 2 cavities 1L pails with handle assembly buy its P280, the 3^rd generation of YIZUMI high speed hydraulic injection molding machine for thin-wall containers.

The high light of the system is to have the handles and the pails integrated into the same mold so the robot will be able to finalize the assembly of the handle and pails immediately after IML labeling of the pails. This solution perfectly solved the problem of frequent blockage of the handles which will happen in an off line pails and handle assembly system and insrease the production efficiency.

As a turn-key IML solution, YIZUMI well optimized the cooperating between the injection molding machine, the mold and the IML robot to maximize the production efficiency. With a cycle time of around 7s, it's no doublt YIZUMI 2 cavities IML system with handle assembly is a price smart choice for pails producers.

Turn-key IML Solutions