Two Platen Injection Molding Machine FA1000 -- LK Technology Holidings Limited

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	3925
Shot weight	g	3572
Shot speed	mm/s	918
Screw diameter	mm	100
Injection pressure	MPa	191
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	10000
Opening Stroke	mm	1800
Space between tie bars	mm x mm	1250 x 1100
Mold thickness(min)	mm	600
Mold thickness(max)	mm	1200
Hydraulic ejection stroke	mm	300
Hydraulic ejection force	kN	350
POWER UNIT
Pump motor	kW	120
Heating capacity	kW	49
GENERAL
Oil tank capacity	L	1800

Platen Dimension

Machine Dimmension

#	Value
A	2990 mm
B	1508 mm
C	1482 mm
D	1332 mm
E	1306 mm
F	2400 mm
G	1800 mm
H	1498 mm
I	1884 mm
J	1526 mm
K	1738 mm
L	2491 mm
M	2139 mm
N	2286 mm

Turn-key 2 Cavities Pails IML Solution with Handle Assembly

Starting from $132,857

Chinaplas 2024 -- Yizumi successfully run the turn-key 2+2 cavities 1L pails IML system with handle assembly at the cycle time of 6.5s and in mold time 1.77s, attracted the attention of visitors from around the world.

Well prepared for the show, YIZUMI system supassed its counter parts of the similar solutions in Chinaplas in both smoothness of running and the cycle time. With the increased popularity of the IML pails with handle among the dairy producers, the IML solutions with the handle assembly for pails is no double would the the top choice for the contnainer producers to increase their productivity and reduce the production cost.

The high lights of the system is that to have the handle and pails in the same mold, the package producer will need only one sets of machinery to produce the IML pails with handle well assembled instead of two. It's an economic and eco-friendly solution of IML pails with handle production.

Turn-key IML Solutions