Two Platen Injection molding Mchine BU2200 -- Borche Injecdtion Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	16611
Shot weight	g	15116
Shot speed	mm/s	71
Screw diameter	mm	150
Injection pressure	MPa	178
Screw L:D ratio	--	23
CLAMPING UNIT
Clamping force	kN	22000
Opening Stroke	mm	2800
Space between tie bars	mm x mm	1850 x 1600
Mold thickness(min)	mm	800
Mold thickness(max)	mm	1700
Hydraulic ejection stroke	mm	450
Hydraulic ejection force	kN	390
POWER UNIT
Pump motor	kW	165
Heating capacity	kW	97
GENERAL
Oil tank capacity	L	2700

Platen Dimension

Machine Dimmension

20L Bucket Side Entry IML Solutions Single Cavity.

NPE 2024, Milacron on show 2 cavities 20L pails side entry IML solution with co-injection technology by 1070 Ton injection molding machine with IML solutions provided by BECK.

The high lights of the system is two material 3 layors co-injection technology with will enable a use of up to 50% of re-cycled material. This technology will help to reduce the use of plastic and carbon release in the production of 20L pails. As the world leading injection mold manufacturer, the co-injection technology mold by mold master is the milestone of this system.

Unlike the Chinese will produce the 20L pails by a 650T injection molding machine with one cavity to reduce the machinery purchasing cost, the Milacron 1070T machine solution will provide the producer a more efficient solution of Pails production. With the IML solution provided by the worlding leading IML solution provider BECK, the Milacron 2 cavities IML systeem will represent an IML system of efficient, reliable with cutting edge technology.

Turn-key IML Solutions