Tow Platen Injection molding Mchine BU1200 -- Borche Injecdtion Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	7964
Shot weight	g	7247
Shot speed	mm/s	106
Screw diameter	mm	130
Injection pressure	MPa	145
Screw L:D ratio	--	19.5
CLAMPING UNIT
Clamping force	kN	12000
Opening Stroke	mm	2000
Space between tie bars	mm x mm	1300 x 1200
Mold thickness(min)	mm	600
Mold thickness(max)	mm	1200
Hydraulic ejection stroke	mm	380
Hydraulic ejection force	kN	300
POWER UNIT
Pump motor	kW	121
Heating capacity	kW	59
GENERAL
Oil tank capacity	L	1800

Platen Dimension

Machine Dimmension

JH-WELLTEC Machine India Pvt. Ltd. on show Welltec new injection molding machine SEII 380 in production of one cavity chair without robot picking in exhibition to show the capacity of the injection molding machine.

In the demo show JH-WELLTEC Machine India Pvt. Ltd. chose a cold runner mold in production of the chair. The advantage of the cold runner mold is it's lower cost and easier for maintenance but will have a runner to be removed manually or automatically. In this show JH-WELLTEC Machine to have the chair free dropped and the runner removed manually. It's economic but not attracting to visitors in an exhibition.

To provide customer with a more efficient turn-key injection automation solution, the better choice would be to have the injection molding machine equipped with a SWITEK 3 axis servo injection robot SW6712DS-20 which has a payload up to 8kg and could be easilly programmed with EOAT sets to remove the runner automatically.

Turn-key IML Solutions