BL450EKH/C3100 -- BOLE High Precision Hydraulic Servo Injection Molding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	1462
Shot weight	g	1345
Shot speed	mm/s	112
Screw diameter	mm	70
Injection pressure	MPa	212
Screw L:D ratio	--	23
CLAMPING UNIT
Clamping force	kN	4500
Opening Stroke	mm	750
Space between tie bars	mm x mm	760 x 710
Mold thickness(min)	mm	330
Mold thickness(max)	mm	780
Hydraulic ejection stroke	mm	210
Hydraulic ejection force	kN	123
POWER UNIT
Pump motor	kW	53
Heating capacity	kW	27.35
GENERAL
Oil tank capacity	L	420

Platen Dimension

Machine Dimmension

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions