HMD 480M8-SPVB -- High Speed Hydraulic Injection Moulding Machine

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	510
Shot weight	g	465
Shot speed	mm/s	517
Screw diameter	mm	57
Injection pressure	MPa	169
Screw L:D ratio	--	24.4:1
CLAMPING UNIT
Clamping force	kN	4800
Opening Stroke	mm	720
Space between tie bars	mm x mm	760 x 710
Mold thickness(min)	mm	330
Mold thickness(max)	mm	750
Hydraulic ejection stroke	mm	160
Hydraulic ejection force	kN	77
POWER UNIT
Pump motor	kW	110
Heating capacity	kW	28.5
GENERAL
Oil tank capacity	L	470

Robot Installation

Platen Dimension

Machine Dimmension

#	Value
A	2030 mm
B	7577 mm
C	7787 mm
D	2280 mm
E	1970 mm

SA-330P is a servo hydraulic energy-saving injection molding machine by FCS Machinery which is suitable for the production of bucket container. This series of injection molding machine have a clamping force range from 220Tons ~ 1000Tons. In the video FCS is trying the production of disposable tablewares.

For the production of disposable tableware, there're a couple of solutions. The basic automatio solution would be to pick the table wares out with a high speed 3 axis injection robot SW7112DS; You can also choose to have it Single PCS Packed or have it Bag Packed or Box packed. With more than 17 years cooperating with the mold maker and injection molding machine manufacturers, SWITEK is experienced to provide you with a turn-key disposable tableware injection production solutions.

Turn-key IML Solutions