EL350/970 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	432
Shot weight	g	393
Shot speed	mm/s	160
Screw diameter	mm	50
Injection pressure	MPa	225
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	3500
Opening Stroke	mm	700
Space between tie bars	mm x mm	810 x 810
Mold thickness(min)	mm	300
Mold thickness(max)	mm	750
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	60
POWER UNIT
Pump motor	kW	32
Heating capacity	kW	22.98
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	7397 mm
B	1358 mm
C	1835 mm
D	430 mm
E	1482 mm
F	310 mm
G	1837 mm
H	2255 mm
I	φ100 mm
J	φ3 mm

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

Turn-key IML Solutions