EL280/970 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	432
Shot weight	g	393
Shot speed	mm/s	160
Screw diameter	mm	50
Injection pressure	MPa	225
Screw L:D ratio	--	22
CLAMPING UNIT
Clamping force	kN	2800
Opening Stroke	mm	600
Space between tie bars	mm x mm	730 x 730
Mold thickness(min)	mm	300
Mold thickness(max)	mm	750
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	60
POWER UNIT
Pump motor	kW	32
Heating capacity	kW	22.98
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	6912 mm
B	1358 mm
C	1835 mm
D	430 mm
E	1463 mm
F	310 mm
G	1818 mm
H	2235 mm
I	φ100 mm
J	φ3 mm

Today I find an interested video in youtube published by FCS Machinery to demonstrate the two tone injection production of 680ml airtight container by their new All-Electric two-component injection molding machine CT-230R which was designed for the production of two-component and multi-component products, including electronic parts, medical appliance, cosmetic containers, etc.

Although it's a 230Ton machine, but as a two-component injection molding machine its size will usually much larger than the standard servo injection molding machine, the robot to recommend here is SW6710DS-20 which is a 3 axis servo injection robot with a payload up to 6kg. Stable and efficient as it's, for sure will help you greatly in your production.

Turn-key IML Solutions