EL230/360 -- LK All Electric High Speed Injection Molding Machine and IML Application

Description	Unit	Value
INJECTION UNIT
Shot volume	cm³	180
Shot weight	g	163
Shot speed	mm/s	200
Screw diameter	mm	40
Injection pressure	MPa	203
Screw L:D ratio	--	19.8
CLAMPING UNIT
Clamping force	kN	2300
Opening Stroke	mm	550
Space between tie bars	mm x mm	610 x 610
Mold thickness(min)	mm	250
Mold thickness(max)	mm	680
Hydraulic ejection stroke	mm	150
Hydraulic ejection force	kN	52
POWER UNIT
Pump motor	kW	18
Heating capacity	kW	11.32
GENERAL
Oil tank capacity	L	0

Platen Dimension

Machine Dimmension

#	Value
A	5942 mm
B	959 mm
C	1529 mm
D	350 mm
E	1388 mm
F	301 mm
G	1696 mm
H	2152 mm
I	φ100 mm
J	φ3 mm

The new FORZA series two platen injection molding machine FA1400 by Ningbo LK Technology Co., Ltd. was installed for the production of plastic chairs with robot picking.

For furniture production it's demanding on the surface of the parts with novelty design. With precise injection the new FORZA series two platen injecdtion molding machine FA1400 can produce the perfac injection surface to meet the stringent requirements in furniture production. With a heavy duty injection robot to provide a turn-key plastic chairs production to customer.

For an injection molding machine of 1400T clamping force, an injection robot with a payload of 15kg would be sufficient for the parts picking. The robot for this application would be SWITEK 3 axis servo injection robot SW7518DS which has a payload of 15kg and is suitable for injection molding machine 650~1800T.

Turn-key IML Solutions